An improved numerical method for constructing Halo/Lissajous orbits in a full solar system model

An improved numerical method that can construct Halo/Lissajous orbits in the vicinity of collinear libration points in a full solar system model is investigated. A full solar system gravitational model in the geocentric rotating coordinate system with a clear presentation of the angular velocity relative to the inertial coordinate system is proposed. An alternative way to determine patch points in the multiple shooting method is provided based on a dynamical analysis with Poincare′sections. By employing the new patch points and sequential quadratic programming, Halo orbits for L_1, L_2, and L_3 points as well as Lissajous orbits for L_1 and L_2 points in the EarthMoon system are generated with the proposed full solar system gravitational model to verify the effectiveness of the proposed method.     

Asymmetries in Mars' Exosphere

Observations and simulations show that Mars' atmosphere has large seasonal variations. Total atmospheric density can have an order of magnitude latitudinal variation at exobase heights. By numerical simulations we show that these latitude variations in exobase parameters induce asymmetries in the hydrogen exosphere that propagate to large distances from the planet. We show that these asymmetries in the exosphere produce asymmetries in the fluxes of energetic neutral atoms (ENAs) and soft X-rays produced by charge exchange between the solar wind and exospheric hydrogen. This could be an explanation for asymmetries that have been observed in ENA and X-ray fluxes at Mars.     

Global Response of Martian Plasma Environment to an Interplanetary Structure: From Ena and Plasma Observations at Mars

As a part of the global plasma environment study of Mars and its response to the solar wind, we have analyzed a peculiar case of the subsolar energetic neutral atom (ENA) jet observed on June 7, 2004 by the Neutral Particle Detector (NPD) on board the Mars Express satellite. The “subsolar ENA jet” is generated by the interaction between the solar wind and the Martian exosphere, and is one of the most intense sources of ENA flux observed in the vicinity of Mars. On June 7, 2004 (orbit 485 of Mars Express), the NPD observed a very intense subsolar ENA jet, which then abruptly decreased within ∼10 sec followed by quasi-periodic (∼1 min) flux variations. Simultaneously, the plasma sensors detected a solar wind structure, which was most likely an interplanetary shock surface. The abrupt decrease of the ENA flux and the quasi-periodic flux variations can be understood in the framework of the global response of the Martian plasma obstacle to the interplanetary shock. The generation region of the subsolar ENA jet was pushed towards the planet by the interplanetary shock; and therefore, Mars Express went out of the ENA jet region. Associated global vibrations of the Martian plasma obstacle may have been the cause of the quasi-periodic flux variations of the ENA flux at the spacecraft location.     

反射面的轴向电磁散射及外形优化

本文联合运用几何光学和等效电磁流法,导出了金属反射面轴向散射场和雷达截面(RCS)的简洁表达式,研究了从旋转二次曲面(凹面或凸面)中寻找具有最低RCS值的曲面形状优化方法,给出了一个典型实例的单站RCS立体分布图,以及最低RCS值所对应的波谷曲线和最佳表面参数。     

小波分析和人工神经网络在金属超声无损检测缺陷分类中的应用

基于金属超声检测中的缺陷脉冲回波为非稳态信号的特点，对高温合金材料超声检测信号的小波变换进行了特征分析，提取了各级小波分解信号的能量分布特征，最后将这些特征输入人工神经网络进行训练和分类，实验表明，这种方法具有良好效果。     

翼面隐身结构在飞航导弹模型上的数值仿真研究

隐身结构是指由蒙皮和多种内部材料组成的、能满足承载要求、并具有明显降低雷达散射截面的结构。目的是探讨在常规布局飞航导弹上采用隐身结构的效果。以某常规布局飞航导弹模型为背景，设计出两种翼面隐身结构方案，并将这两种翼面隐身结构方案分别应用于飞航导弹模型的弹翼。应用时域有限差分法（FD-TD法）建立了飞航导弹模型电磁散射数值模型。通过数值仿真手段，计算、比较和分析了含有翼面隐身结构的飞航导弹和普通全金属飞航导弹的RCS值。数值仿真结果显示，与普通飞航导弹相比，这两种翼面隐身结构在许多方位上均能有效降低飞航导弹的RCS值。     

天线的散射机理和雷达截面减缩

飞行器头部的天线是鼻锥方向的一个强散射源,它对目标雷达截面的贡献包括了普通的结构散射项和再辐射引起的模式散射项,后者是天线作为一个加载散射体所特有的。本文给出了这两项雷达截面的散射机理和分析计算方法,并提出了减小天线雷达截面的若干技术途径及其实际效果。     

关于双向弯曲变形构件危险截面的讨论

本文通过具体例题，阐述了双向弯曲变形构件中危险截面的判定方法，论证了合成弯矩大的截面不一定是危险截面的结论。     

黄金分割自适应鲁棒控制器设计新方法

本文在全系数自适应控制理论基础上,给出了一种实用的黄金分割自适应鲁棒控制器的设计方法及理论分析。对于参数未知、线性定常或慢变的二阶对象,只要参数估计值在一个范围内,该控制器就能保证闭环系统稳定,且系统输出的动态性能较好。从而解决了二阶系统自适应控制在初始过渡过程阶段的实际应用问题。     

无人机模拟训练系统中的实时飞行仿真

为了降低无人机的试飞成本,提高操纵手的技能,设计了一种模拟训练系统。介绍了该模拟训练系统的特点和构成,着重对系统中实时飞行仿真的各模块设计方法进行了研究。在DOS操作系统中用C语言实现飞行仿真软件,并讨论了软件实现中的模态切换等关键问题。通过飞行剖面仿真实验,证明该仿真系统可靠性高、实时性好。